TC-R/S Breakout for Sony FX3 / FX30 - In another worlds first...the Mutiny TC-R/S for Sony FX3 and FX30 camera, feeds Timecode IN and R/S (remote triggering) via the multi-terminal (Multiport). Works with every FIZ wireless follow focus system (Preston, Arri, C-Motion, Nucleus, Heden, etc) as well as every timecode generator (Tentacle, Deity, Deneke, Ambient, etc). TC-R/S should trigger most sony mirrorless cameras in video mode but timecode will not work for A7S series, A9 series, A7R series etc.   

Features:

• 5pin 0B Timecode IN port
• Fischer 3 R/S port (pin 1 = Ground, Pin 2 = N/C, Pin 3 = R/S
• 6" Multi-terminal cable built in
• 1/4-20 through hole for mounting
• 2x M3 threaded locating pin holes with spacing for ⌀15mm and ⌀10.4mm(ARRI) standards

Size: L=1.3" x W=0.7"  x D=1"   

Optional is our TC-R/S Mini mounting plate for if you want to mount directly to the camera body and not a cage.  This mount allows full use of the XLR and standard  handle and can orient two ways.

For Timecode Change your FX3 / FX30 Menu Settings to:

1) In the Sony Menu select TC/UB then Timecode Run and select Free Run, and Time Code Make to Preset.

2) Set your Timecode device and camera to the same frame rate

3) Connect your Timecode device (make sure you are outputting timecode and using a cable that is TC device ---> Camera) to your FX3/30 multi-terminal (multiport USB) 

For R/S Change your FX3 / FX30 Menu settings to:

Menu -> Setup -> Operation Customize -> Rec w/Shutter -> On.